Stainless steel wire EN 10270-3
This is cold-drawn wire for the manufacture of springs exposed to corrosive agents and temperatures up to 250 °C. Even though stainless steel, has a certain degree of magnetic permeability:(the magnet attaches.
Stainless steel EN 10270-3 – 1.4310 / X10CrNi18-8 / AISI 302
Chemical composition, mass%:
| C | Si | Mn | P | S | Cr | Mo | Ni | N |
|---|---|---|---|---|---|---|---|---|
| 0.05-0.15 | 2.0 max | 2.0 max | 0.045 max | 0.015 max | 16.0 – 19.0 | 0.80 max | 6.0-9.5 | 0.11 max |
| Density | Elastic Modulus E | Shear modulus G | Working temperature |
|---|---|---|---|
| 8.0 Kg/dm3 | 185 KN/mm2 | 73 KN/mm2 | -200 +250 °C |
Tensile strength:
| Wire diameter | N/mm2 |
|---|---|
| d ≤ 0.2 | 2200-2350 |
| 0.2 < d ≤ 0.3 | 2150-2300 |
| 0.3 < d ≤ 0.4 | 2100-2250 |
| 0.4 < d ≤ 0.5 | 2050-2200 |
| 0.5 < d ≤ 0.65 | 2000-2150 |
| 0.65 < d ≤ 0.8 | 1950-2100 |
| 0.8 < d ≤ 1.0 | 1900-2050 |
| 1.0 < d ≤ 1.25 | 1850-2000 |
| 1.25 < d ≤ 1.5 | 1800-1950 |
| 1.50 < d ≤ 1.75 | 1750-1900 |
| Wire diameter | N/mm2 |
|---|---|
| 1.75 < d ≤ 2.0 | 1700-1850 |
| 2.0 < d ≤ 2.5 | 1650-1750 |
| 2.5 < d ≤ 3.0 | 1600-1700 |
| 3.0 < d ≤ 3.5 | 1550-1650 |
| 2.5 < d ≤ 4.25 | 1500-1600 |
| 4.25 < d ≤ 5.0 | 1450-1550 |
| 5.0 < d ≤ 6.0 | 1400-1500 |
| 6.0 < d ≤ 7.0 | 1350-1450 |
| 7.0 < d ≤ 8.5 | 1300-1400 |
| 8.5 < d ≤ 10.0 | 1250-1350 |
Stainless steel EN 10270-3 – 1.4401 / X5CrNiMo17-12-2 / AISI 316
Chemical composition, mass%:
| C | Si | Mn | P | S | Cr | Mo | Ni | N |
|---|---|---|---|---|---|---|---|---|
| 0.07 max | 1.0 max | 2.0 max | 0.045 max | 0.015 max | 16.5 – 18.5 | 2.0-2.50 | 10.0-13.0 | 0.11 max |
| Density | Elastic Modulus E | Shear modulus G | Working temperature |
|---|---|---|---|
| 8.0 Kg/dm3 | 180 KN/mm2 | 71 KN/mm2 | -200 +250 °C |
Tensile strength:
| Wire diameter | N/mm2 |
|---|---|
| d ≤ 0.2 | ≥ 1725 |
| 0.2 < d ≤ 0.3 | ≥ 1700 |
| 0.3 < d ≤ 0.4 | ≥ 1675 |
| 0.4 < d ≤ 0.5 | ≥ 1650 |
| 0.5 < d ≤ 0.65 | ≥ 1625 |
| 0.65 < d ≤ 0.8 | ≥ 1600 |
| 0.8 < d ≤ 1.0 | ≥ 1575 |
| 1.0 < d ≤ 1.25 | ≥ 1550 |
| 1.25 < d ≤ 1.5 | ≥ 1500 |
| 1.50 < d ≤ 1.75 | ≥ 1450 |
| Wire diameter | N/mm2 |
|---|---|
| 1.75 < d ≤ 2.0 | ≥ 1400 |
| 2.0 < d ≤ 2.5 | ≥ 1350 |
| 2.5 < d ≤ 3.0 | ≥ 1300 |
| 3.0 < d ≤ 3.5 | ≥ 1250 |
| 2.5 < d ≤ 4.25 | ≥ 1225 |
| 4.25 < d ≤ 5.0 | ≥ 1200 |
| 5.0 < d ≤ 6.0 | ≥ 1150 |
| 6.0 < d ≤ 7.0 | ≥ 1125 |
| 7.0 < d ≤ 8.5 | ≥ 1075 |
| 8.5 < d ≤ 10.0 | ≥ 1050 |
MOLLIFICIO MODENESE S.R.L.
REQUEST A QUOTE
OUR CERTIFICATES
